Physio Control LIFEPAK 15, Руководство по обслуживанию

Страница: 319 / 527

LIFEPAK 15 Monitor/Defibrillator
Service Manual
Replacement Procedures
Handle Replacement
Section Menu Section Contents Procedures Back Index
321
8
Handle Replacement
Handle replacement consists of the following procedures:
•
Removing the Handle (p. 321)
•
Installing the Handle (p. 321)
Removing the Handle

To remove the handle:
1. Remove the four screws ( 201407-069 ) for each handle cover.
Discard the screws.
2. Remove the left and right shoulder strap brackets ( 3207708-
000 ).
3. Remove the left ( 3207707-000 ) and right ( 3207746-000 )
handle covers.
4. Remove the handle ( 3207706-000 ).
Installing the Handle

To install the handle:
1. Place the handle ( 3207706-000 ) in the slots of the case. (Note
that the front side of the handle has the triangular indentation.)
2. Attach the left ( 3207707-000 ) and right ( 3207746-000 ) handle
covers to the rear case using six new screws ( 201407-069 );
torque to 10 in-lb using a P2 bit.
3. Install the shoulder strap brackets ( 3207708-000 ) using two new
screws ( 201407-069 ); torque to 10 in-lb using a P2 bit.
handle cover
screw
locations
(4 places)
handle cover
screw
locations
(4 places)
shoulder
strap
brackets
handle covers
removed
Figure 8.103—Handle replacement