Phybridge UniPhyer LB-UA2324, Описание системы

Страница: 37 / 38

31 / 34
Figure 0-3 Cluster network topology – Star
Before you group a Master and a Slave UniPhyer, some parameters need to be well configured:
1. Cluster domain name: The group name for a cluster must be the same on Master and Slave.
2. Cluster IP address: IP address to be used for remote management when Master and Slave are
grouped together.
3. NE cluster name: A name to identify Master or Slave.
4. Set private IP address on in-band port for both Master and Slave UniPhyer. The private IP is used
for communication between Master and Slave. The management center actually uses Cluster IP
address for remote management.
5. Master and Slave need to be configured with same management VLAN.
6. The default gateway should be configured to the router that is aware how to route management
traffic to Management Center of the management network. The setting of Cluster default gateway
should be the same between Master and Slave.