Photron Revision 1.03E Скачать руководство пользователя страница 90

Страница: 90 / 93

Chapter 6. Warranty

6.1. About the Warranty

This system has been shipped having undergone testing. However, in the unlikely event that it

malfunctions due to a manufacturing defect, it will be repaired, at no charge, within the warranty

period.

■

Warranty Exceptions

The following exceptions will result in fee-based repair, even within the warranty period.

①

Damage or malfunction as a result of fire, earthquake, water damage, lightning, other natural

disasters, pollution, or the effects of abnormal voltage.

②

Damage or malfunction as a result of dropping or mishandling during shipment or when

moving after purchase or misuse.

③

Consumable goods (cables)

④

When repair, adjustment, or alternation done by an entity other than Photron service has

been performed on the system, or damage or malfunction that is determined to be attributed

to a fault in the use the product.

•

For inquires related to malfunction, contact the dealer where the product was purchased or

Photron (see 7.1. Contacting Photron).

Содержание Revision 1.03E






























































































Результаты поиска

Содержание Revision 1.03E

Отзывы:

Photron Revision 1.03E, Руководство пользователя, Страница: 90 / 93

Результаты поиска

Содержание Revision 1.03E

Отзывы: