Photron IDP-Express R2000, Руководство по оборудованию

Страница: 7 / 53

Caution
■ Do NOT touch the card edge connector part of this unit. It may cause a loose connection or
malfunction.
■ Please consult to us in advance, When you perform shoot by which laser light and direct rays
go into a image sensor surface.
■ Do NOT set the system in a location where the temperature gets unusually hot.
The trunk and inside of a car can get especially hot in summer.
Doing so can cause the outer case and internal components to deteriorate or cause a fire.
■ Do NOT place the system in a location prone to oily smoke or steam, or in a location with a
lot of humidity or dust.
Oil, moisture, and dust conduct electricity, which can cause a fire or electric shock.
■ Ambient temperature 5-45° C, humidity 20-80% RH or lower, maximum altitude 2000m
or lower.
In addition, if exceeding these limits, use in a condensation-free environment.
Doing so can cause malfunction.
■ Do NOT store the equipment in a location where the temperature goes below -20°C
or higher than 60°C.
Also, prevent condensation from forming during shipment
■ This device is for indoor use, do not use it outdoors.
Do not use in a location that has dust.
Doing so can cause malfunction.