Photron Fastcam SA3, Руководство по оборудованию

Страница: 62 / 101

Chapter. 3 Recording
50
3.18.2. GENERAL OUT Signal Settings
Details of the signals output from the GENERAL OUT connector explained in section “3.15.
Input/Output Signal Types” are shown in the chart below. There are three GENERAL OUT
connectors and individual settings can be made for each connector.
Menu Display Contents Signal Type
SYNC POS
SYNC POS&'9;Outputs a positive polarity
vertical synchronization signal. +5V CMOS Output
Positive Polarity
SYNC NEG
SYNC NEG&'9;Outputs a negative polarity
vertical synchronization signal. +5V CMOS Output
Negative Polarity
EXPOSE POS
Outputs the camera head's image
sensor's exposure interval at H level. +5V CMOS Output
Positive Polarity
EXPOSE NEG
Outputs the camera head's image
sensor's exposure interval at L level. +5V CMOS Output
Negative Polarity
REC POS
REC POS&'9;Outputs an interval signal
during recording at H level. +5V CMOS Output
Positive Polarity
REC NEG
REC NEG&'9;Outputs an interval signal
during recording at L level. +5V CMOS Output
Negative Polarity
TRIG POS
Outputs the trigger signal received by the camera at H
level. +5V CMOS Output
Positive Polarity
TRIG NEG
Outputs the trigger signal received by the camera at L
level. +5V CMOS Output
Negative Polarity
READY POS
Outputs a signal at H level during the trigger wait state.
(READY in START mode.) Only valid during START,
CENTER, END, and MANUAL modes.
+5V CMOS Output
Positive Polarity
READY NEG
Outputs a signal at L level during the trigger wait state.
(ENDLESS recording state in CENTER, END, MANUAL)
Only valid during START, CENTER, END, and MANUAL
modes.
+5V CMOS Output
Negative Polarity
IRIG RESET POS
Outputs the camera's internal IRIG reset signal (1PPS)
at H level. +5V CMOS Output
Positive Polarity
IRIG RESET NEG
Outputs the camera's internal IRIG reset signal (1PPS)
at H level. +5V CMOS Output
Negative Polarity
When using as a part of a system, verify the characteristics of the output signals before using
them.