FASTCAM-PCI Series Hardware Manual
Cable connection for 4-cameras sync operation
*Hardware setting:
1st Camera (
Master
)
VSO
TRO
VSI
TRI
2nd Camera (
Slave
)
VSO
TRO
VSI
TRI
3rd Camera (
Slave
)
VSO
TRO
VSI
TRI
4th Camera (
Slave
)
VSO
TRO
VSI
TRI
:Sync cables and Internal trigger signal cables
*Please contact Photron to purchase FASTCAM original sync signal cables.
50 millimeters long
IL Connector, 2 pins IL Connector, 2 pins
IL-G-2S-S3C2 IL-G-2S-S3C2
(Jumper)
*Application Software Setting
Software must be properly reset for the cameras to operate in sync mode.
In the sync operation mode, one of the cameras must be set to master mode while others are set
to slave mode. For the cameras that are to follow the master, check the “Ext sync In” box in the
camera setup menu from the “More” button. Do not check the “Ext sync In” box for the camera that
is the master, or the cameras will not work.
- 20 -
