FASTCAM-PCI Series Hardware Manual
4.
Setting dip switches on PCI main board
１
２
３
４
５
６
７
８
ON
Dip Sw itches
Dipswitches 1 to 4 are for activating the additional memory modules. Reset the dipswitches to
match the number of added memory modules looking at the table below.
Note: Dipswitches 5 to 8 are factory set. Please do not disturb them, or they may cause
malfunctioning of the camera.
Setting
Dipswitch setting
Number of memory
Modules
1 2 3 4
1 (128 M Byte)
ON
OFF
OFF
OFF
2 (256 M Byte)
ON
ON
OFF
OFF
3 (384 M Byte)
ON
ON
ON
OFF
4 (512 M Byte)
ON
ON
ON
ON
ON: Move SW upward OFF: Move SW downward
Match the number of added memory modules and dipswitch setting correctly, or the system may
fail to capture and record images properly.
5.
Connecting between PCI main board and memory modules
Make sure the connectors are firmly engaged to their entire depth. Redo the rataining screws to
fasten the board firmly.
6.
Install the PCI board in the PC following the instructions given in section
2.3.1.
- 18 -
