Photron FASTCAM-512 PCI, Руководство по оборудованию

Страница: 36 / 55

FASTCAM-512PCI Hardware Manual
- 28 -
2.1.3. Other Specifications
Make sure, before use, that the power requirement on the PCI bus does not exceed the capacity of
the PC
’s power supply unit.
Make sure, before use, that the total power requirement on the power cable between the PC
’s
power supply unit and PCI board does not exceed the PC
’s supply capacity on the +12.0 and/or
+5.0 VDC lines.
In case of excessive power requirement on the power cable (between the PC
’s power supply unit
and the PCI boards) as a result of a multiple-camera operation involving two or more cameras, a
power cable(s) with a power source(s) independent from the currently used PC must be added as
necessary.
Application Software and OS
PFV(Photron FASTCAM Viewer3）/SDK compatible
Windows 2000/Windows XP/Windows Vista
Memory Partitioning Partitioning up to 8 divisions
Camera ID Number To be set by switch on Grabber Board
Master/Slave for Sync To be set by switch on Grabber Board
Number of Grabber Boards
Installable per PC
Up to 4 boards (PC must have five or more slots)
Multiple Cameras per
Grabber Board Multiple camera heads can be used with one Grabber Board.
Note: Mixed use of Color and Monochrome cameras available.
Power Supplies +5V (2A) and +3.3V (2.5A) for both 1.3GB and 2.6GB models
Ambient Temperature
0 to 40 degrees Celsius, No condensation (must be within the allowable
temperature range for the PC)