PHOTONIS PD-PRO-16B, Руководство пользователя

Страница: 18 / 25

15.2. Fitting the Head Mount
a. Loosen all straps and unclick the chin support
b. Place the head mount on your head. When necessary loosen also the rotary adjustment
wheels to get a comfortable feeling.
c. Close the chinstrap, tighten the straps and finish by adjusting the three rotary wheels until the
head mount sits firmly and in the correct, cantered position of your head and face.
d. Attach the head/helmet adapter with the NVLS-24 adapter by inserting it into the
NVLS-24 receptacle.
e. Adjust the BINOCULAR to get a comfortable and circular vision, centered in front of your eye.
When necessary readjust head mount and BINOCULAR.
f. The
PD-PRO-16B
allows the individual flip to side of each arm and the binocular flip-up.
15.3. Attachment of the Helmet Adapter
a. Insert the head/helmet adapter on the NVLS-24 adapter and then click the assembly into the
helmet NVLS-24 shroud, starting the insertion on the top side of the NVLS-24 shroud and
pushing firmly the bottom until the interface plate is completely inserted and locked. Adjust
the height if needed by releasing the locking lever.
b. Position the clutch adapter in the fully forward position.
c. When using a single PD-PRO-16B, it should be first placed in front of the required eye and
then adjusted.
d. Moving of the PD-PRO-16B from eye to eye is done by releasing the central locking screw,
pushing the arm slightly away from the face until it is released from the dent, moving towards
the other eye until it engages the second dent and locking again the central screw.
e. Fine adjustment of the PD-PRO-16B in front of the eye is done by means of the height
adjustment and the rotation of the BINOCULAR after pressing firmly the clutch.
f. When using binocular configuration proceed in the same way as with BINOCULAR
configuration for each system.
Figure 13 Combinations of Universal Head/Helmet Mount
Night Vision
p. 18