Photon Focus MV1-D1024E, Руководство пользователя, Страница: 83 / 109

8.1 MV1-D1024E-160
This property disables LinLog and Burst trigger.
Exposure time defined by "Trigger Pulse Width" is also known as Level controlled
trigger.
Further trigger settings:
Trigger Delay [ms]: Programmable delay in milliseconds between the incoming trigger edge
and the start of the exposure.
Trigger signal active low:
Define the trigger signal to be active high (default) or active low.
Burst Trigger
An external trigger event start a predefined number of acquisition. The period time between
the acquisitions can be configured.
Enable Burst Trigger: Delay in milliseconds from the input trigger edge to the rising edge of
the strobe output signal.
Number of Burst Triggers: Set the number of burst
Burst Trigger Period [ms]: Set the time between the burst in milliseconds.
Burst Trigger Delay [ms]: Set the delay of the burst trigger in milliseconds.
Strobe
The camera generates a strobe output signal that can be used to trigger a strobe. The delay,
pulse width and polarity can be defined by software. To turn off strobe output, set
StrobePulseWidth to 0.
Strobe Delay [ms]: Delay in milliseconds from the input trigger edge to the rising edge of the
strobe output signal.
Strobe Pulse Width [ms]: The pulse width of the strobe trigger in milliseconds.
Strobe signal active low:
Define the strobe output to be active high (default) or active low.
MAN064 02/2020 V1.1 83 of 109