Photometrics Cascade 128 Скачать руководство пользователя страница 5

iv

 

Cascade User Manual

 

Owner's Manual and Troubleshooting 

You should read the owner’s manual thoroughly before operating this product. In the unlikely event that you 

should encounter difficulty operating this product, the owner’s manual should be consulted before contacting 

the Photometrics technical support staff or authorized service representative for assistance. If you have 

consulted the owner's manual and the problem still persists, please contact the Photometrics technical support 
staff or our authorized service representative. 

See Item 12 in the following section of this warranty ("Your 

Responsibility") for more information. 

Your Responsibility 

The above Limited Warranties are subject to the following terms and conditions: 

1.

 

You must retain your bill of sale (invoice) and present it upon request for service and repairs or 

provide other proof of purchase satisfactory to Photometrics. 

2.

 

You must notify the Photometrics factory service center within  (30) days after you have taken 

delivery of a product or part that you believe to be defective. With the exception of customers who 

claim a “technical issue” with the operation of the product or part, all invoices must be paid in full in 

accordance with the terms of sale. Failure to pay invoices when due may result in the interruption 

and/or cancellation of your one (1) year limited warranty and/or any other warranty, expressed or 

implied.  

3.

 

All warranty service must be made by the Photometrics factory or, at our option, an authorized 

service center. 

4.

 

Before products or parts can be returned for service you must contact the Photometrics factory and 

receive a return authorization number (RMA). Products or parts returned for service without a return 

authorization evidenced by an RMA will be sent back freight collect. 

5.

 

These warranties are effective only if purchased from the Photometrics factory or one of our 

authorized manufacturer's representatives or distributors.  

6.

 

Unless specified in the original purchase agreement, Photometrics is not responsible for installation, 

setup, or disassembly at the customer’s location. 

7.

 

Warranties extend only to defects in materials or workmanship as limited above and do not extend to 
any product or part which has: 

 

been lost or discarded by you;  

 

been damaged as a result of misuse, improper installation, faulty or inadequate maintenance or 
failure to follow instructions furnished by us;  

 

had serial numbers removed, altered, defaced, or rendered illegible; 

 

been subjected to improper or unauthorized repair; or 

 

been damaged due to fire, flood, radiation, or other “acts of God” or other contingencies beyond 

the control of Photometrics. 

8.

 

After the warranty period has expired, you may contact the Photometrics factory or a Photometrics-

authorized representative for repair information and/or extended warranty plans. 

9.

 

Physically damaged units or units that have been modified are not acceptable for repair in or out of 

warranty and will be returned as received.  

10.

 

All warranties implied by state law or non-U.S. laws, including the implied warranties of merchantability 

and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth 

above. With the exception of any warranties implied by state law or non-U.S. laws, as hereby limited, the 

forgoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements, and similar 

obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event 

shall Photometrics’ liability exceed the cost of the repair or replacement of the defective product or part. 

Содержание Cascade 128























































Отзывы: