Phonic PCR2213, Руководство пользователя

Страница: 16 / 29

15
7 77 77
. DELAY control
These 2 knobs adjust the signal delay of LF portion. The delay time is between 0~4msec, equal to 120cm to
compensate the offset between HF horn and LF driver.
8 88
88
. CROSSOVER 1, CROSSOVER 2
These are the precision crossover frequency control knobs to set the crossover points. The crossover fre-
quency not only depends on this pot but also the range push switch [9] next to the pot. There are 2 range, x1
and x10. The x1 range is printed with white number, and the x10 range is printed with black number on white
box.
When in mono 3-way mode, the crossover 1 set the crossover frequency of low/mid, and the crossover 2 set
the crossover frequency of mid/high as printed at the bottom of the knobs.
9 99
99
. RANGE
The crossover frequency range is cut into 2 for more precision control. 80 to 800Hz is the x1 range, and 800Hz
to 8KHz is the x10 range. 2 LED are incorporated to show the selected range.
10 10
10 10 10
. HIGH
These 2 knobs control the output level (+/-6 dB) of HIGH portion for the user to set proper level in association
with LOW level controls [3]. When in mono 3-way mode, the channel 1 HIGH is not used, and the channel 2
HIGH is the HF as printed at the bottom of the knob.
11 11
11 11 11
. STEREO
This led indicates the unit is in stereo mode. The mode is set by [24] in the rear panel.
12 12 12 12 12
. SUB
This led indicates the summing of the low portions of both channels. This mode is set by [23] in the rear panel.
This mode will be disengaged in mono mode automatically.
13 13 13 13 13
. MONO
This led indicate the unit is in mono mode. The mode is set by [24] in the rear panel.
14 14
14 14
14
. LIMITER ON
This led indicates the limiters of the 4 outputs are on which is activated by button[17].