Phonic MM1705a, Руководство пользователя

Страница: 14 / 24

PHONIC CORPORATION
Page 14
MM1705a USER’ S MANUAL
16 MASTER DISPLAY
This blue PWR LED will light when the power is
on.When you would like to monitor any input chan-
nel or output signal, depress its PFL button , or its
AFL button in GROUP, and the master level meter
will show you the signals which you have chosen. In
addition, the green PFL LED indicator will light up.The
13-segment LED meter shows the level of master
mix L and R in the stereo mode.
17 MONO LEVEL CONTROL
The MONO output signal mixes the pre-fader
signal of the MAIN L/R. You can use this
signal as the center cluster or apply it to
another area. This knob controls the level of
the mono mix output.
18 MAIN L/R OUTPUT FADER
These 60mm long faders adjust the output level
of the MAIN L/R.
A +48V global Phantom Power master switch lo-
cated in the rear panel, available for condense mi-
crophone on each microphone input channel. All fad-
ers (CH1~11, Group 1, Group 2, L/R and MONO )
should be all the way down when this phantom power
is switched on. In order to prevent excessive noise
to stage monitor speakers and main speakers, you
should not have condensor microphones pluged in
when the +48V master switch is on.
19 POWER SWITCH
Before you turn on the power switch, please pull down
all the faders to the bottom to prevent unwanted tran-
sient high level signals from destroying your audio
system. The power on LED will light up in the display
section when you turn on the power switch. The de-
scription beside the power socket tells you the part
number of power supply adaptor for your local main
power.
18 PHANTOM POWER SWITCH
REAR PANEL DESCRIPTION
REAR PANEL DESCRIPTION