Phonic KT-210A Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 30

Phonic KT-210A Скачать руководство пользователя страница 18

14

KT-8A / KT-210A

KT-8A / KT-210A

English

PROTECTION CIRCUITRY

The KT series line array speakers feature a number

of protection mechanisms in place to ensure no dam-

age occurs to the speakers. This page offers clear,

concise monitoring of many aspects of the KT series.

VOLTAGE METER (V):

This shows the voltage

that the amplifier is delivering. This helps determine

whether a channel is currently sending high voltage

levels.

CURRENT METER (A):

This shows the current that

the amplifier is delivering to a load in amps. This is

useful in determining if a speaker load is open or

shorted.

WATT METER (W):

This shows the power level in

Watts that the amplifier is delivering to speakers. This

can be helpful in determining whether speakers are

receiving adequate power or if they can handle more.

The levels will reduce by 0.5 dB every 6 seconds

and return to normal levels at the same rate once

the issue has been resolved.

POWER SUPPLY VOLTAGE (V):

This indicates the

+/- voltage provided to channel groups (1 to 4 and 5

to 8). When the supply voltage e/- 20%, the

power is automatically turned off. When the supply

voltage returns /- 20%, the power is automati-

cally activated.

CHANNEL REDUCE LEVEL (dB):

These individual

meters give an indication of when protection circuitry

has kicked in and input levels have been reduced to

compensate.

TEMPERATURE (°C):

This meter displays the inter-

nal temperature of each channel. Temperatures in

excess of 100°C will trigger the protection circuitry.

DC OFFSET:

This indicates if the DC offset protection

was triggered on any channel (LF, HF and/or HF).

AMP SHUTDOWN:

These indicators show when an

amplifier channel has shutdown. This could be in

response to excessive heat, or potentially overcur-

rent protection.

FAN SPEED:

This meter gives an up-to-the-minute

indication of the speed of the internal fan. When the

speed hits maximum, over-temperature protection

may kick in as a response. We suggest manually

reducing levels to help avoid this occurring.

«
...
16
17
18
19
20
...
»

Содержание KT-210A































Отзывы:

Нет отзывов