Phonic KT-210A, Руководство пользователя, Страница: 16 / 30

12
KT-8A / KT-210A
KT-8A / KT-210A
English
DELAY
Both the KT-8A and KT-210A feature a delay function.
An output delay can be applied to the entire speaker
or individual frequency outputs (high, mid and low).
Adding a delay to an entire speaker array can help to
compensate for distance between speakers in large
multi-speaker setups. A delay time of one millisecond
per foot (or 3 milliseconds per meter) that the speaker
is away from the stage is the general rule of thumb
in this application. This, however, is not always the
case. Thankfully, the KT Network System allows the
delay time to be set in “meters” or “feet” instead of
“milliseconds”, taking a lot of the guesswork out of
the setup.
DELAY CONTROLS:
These controls adjust the total
delay time that would be added to their respective
channels (input delay, low frequency, mid frequency
or high frequency). The delay time can be adjusted
in milliseconds, meters and feet.
ON BUTTONS: The on buttons quite simply activate
the delay function of the corresponding channel.
TEMPERATURE:
The temperature option allows the
user to set the ambient temperature of the current
venue. This allows the KT Network System to cal-
culate a more accurate delay-time when set in “feet”
or “meters”. In addition to the temperature control,
this section of the Delay function offers “time (ms)”,
“feet” and “meter” buttons, changing the adjustable
delay between these parameters.
PARAMETER BUTTONS: Found on the bottom
right-hand side of the KT Network System software,
these three buttons allow users to select the param-
eter adjusted by the delay controls. Selecting “TIME”
will allow the delay to be adjusted in milliseconds
(recommended for experienced users), while “FEET”
and “METERS” will allow the delay to be adjusted
according to distance. When adjusting the delay by
distance, Phonic recommends using the distance
between the KT line array speaker and the front-of-
house speakers.