Phonic FIREFLY 302 USB, Руководство пользователя

Страница: 9 / 28

9
Firefly 302 USB
USB Interface
System Requirements
The following are the minimum required specifications for use with the Firefly 302 USB.
If your computer does not meet these requirements, you will experience lagging of au-
dio and possible freezing of your computer when attempting to operate the Firefly.
Windows
• Microsoft® Windows® XP (with SP2) or Microsoft® Windows® Vista
• Available USB 2.0 port
• Intel Pentium® processor or equivalent AMD Athlon processor
• Motherboard with Intel or VIA chipset
• 500 RPM or faster hard disk drive (7200 RPM or faster with 8 MB cache recom-
mended)
• 256 MB or more of RAM (512 MB recommended)
Macintosh
• OS X Leopard 10.5.1 or later with USB support
• Intel Core 2 Duo or later processor (G processors are not supported)
• 256 MB or more of RAM (512 MB or more recommended)
Driver Installation
To use the Firefly efficiently (or at all) on any computer, it is important to install all the
necessary drivers from the included CD. We advise that users read all instructions
carefully before continuing on to each step of the installation process, as they will be
asked to, howev disconnect and reconnect their Firefly.
Windows XP (with Service Pack 1 or 2)
1. It is recommended that you quit all applications before starting the installation pro-
cess.
2. Connect the Firefly 302 USB to the computer, leaving the power of the unit off.
3. Insert the installation CD included with your Firefly into the CD-ROM drive of your
computer. If the CD does not automatically start the installation process within a
few moments, then navigate to “My Computer” → your CD-ROM drive → “Firefly -
302USB_Driver” → double-click “setup.exe” to begin the installation manually. The
Firefly Control Panel software also will be installed at this time.
4. Follow the on-screen installation instructions, turning the Firefly on when asked to
‘disconnect and reconnect’ the unit.