Phonic AM5GE, Руководство пользователя

Страница: 8 / 32

AM5GE / AM6GE
4
English
Inputs and Outputs
1. Combo Input Jacks
These jacks accept both 3-pin XLR and 1/4” TRS
phone jack inputs for balanced and unbalanced
signals. They can be used in conjunction with
microphones – such as professional condenser,
dynamic or ribbon microphones – with standard XLR
male connectors, and feature low noise preamplifiers,
serving for crystal clear sound replication. They can
also be used with various line level devices, such as
keyboards, drum machines, electric guitars, and a
variety of other electric instruments.
NB. When these inputs are used with condenser microphones,
the Phantom Power should be activated. However, when
Phantom Power button is engaged, single ended (unbalanced)
microphones and instruments should not be used on the
Mic inputs unless specifically approved by the microphone
manufacturer.
2. Stereo Channels
The AM5GE and AM6GE mixers each features 2
stereo channels, thrown in for maximum flexibility.
Each of these channels features two 1/4” phone jacks
for connection of various line level input devices, such
as electronic keyboards, guitars and external signal
processors or mixers. Stereo channels can also be
used as mono channels, where the signal from any
device plugged into the left input will be duplicated to
the right (this does not work in reverse).
4
5
6
7
8
9
1
2
3
1
2
7
8
9
5
6
3. Stereo AUX Return (AM6GE only)
These 1/4” TS inputs are for the return of audio to
the mixer, processed by an external signal processor.
If really needed, they can also be used as additional
inputs, with a level control located on the face of
the mixer. Like with the stereo input channels, these
inputs can be used as mono channels by connecting
any device into the Stereo AUX return’s left input.
4. AUX Send (AM6GE only)
This 1/4” TS outputs may be used to connect to
an external digital effect processor, or even to an
amplifier and speakers (depending on your desired
settings) to the mixer. The signal is taken from the
AUX control on each input channel.
5. Phones
This stereo output is suited for use with headphones,
allowing monitoring of the mix. The audio level of
this output is controlled using the Phones or Phones/
Control Room control.
6. Headset Connectors
A stereo headphone output and microphone input
(1/8” TRS and TS connectors, respectively) are
included for connection of modern headsets. These
are perfect for livestreamers and digital conferencing
when using the AM Gold as a soundcard.
MAKING CONNECTIONS
AM5GE
AM6GE