LogiBit 1200 manual
Menu Structure
2
➁
➂
➃
➀
2. MENU STRUCTURE
2.1 FUNCTION KEYS
➀
LEFT/UNDO:
With this key you can move to the left in the menu structure.
The key is also used to undo changes in a parameter, which has
not
already
been
saved.
➁
UP/INCREASE:
With this key you move upward in the menu structure. It can
also be used to change/increase a parameter.
➂
RIGHT/SAVE:
With this key you move to the right in the menu structure. The
key is also used to save changes in a parameter.
➃
DOWN/DECREASE:
With this key you move downward in the menu structure. The
key is also used to change/decrease a parameter.
2.2 MENU POINTS
SERVICE MODE:
The individual parameters in the amplifi er can only be changed
when the LogiBit amplifi er is in SERVICE MODE. To do this you
must
switch
off
the
amplifi er at the on/off switch, then while
holding
function
key
➁
up/increase and
➃
down/decrease in at
the same time, turn on the amplifi er. Display will show
“SERVICE” for a short period. If the LogiBit amplifi er is
not put in SERVICE MODE the only parameters that can be
changed are RECORD and CONTRAST.
WARNING!
The above may only be carried out by authorized Phonicear
personnel. It is strongly advised that no unauthorized
person is allowed to put the amplifi er in SERVICE MODE.
Содержание LOGIBIT 1200
