16
16
17
17
Operation
Operation
Adjusting volume
Press receiver button
1.
R2+
(volume up) or
R2-
(volume down) to set comfortable listening level.
The receiver indicators
2.
R3
to
R7
illuminate depending on volume level.
R2+
R2-
2
1
Please note:
The maximum volume level has been reached if all fi ve indicators
•
R3
to
R7
are illuminated. If the signal is still too
weak adjust the volume on your mobile telephone or contact your hearing care professionel for adjustment of the
telecoil in the hearing aid.
Accepting an incoming call
When a call comes in a ringing tone will be heard in the hearing aid or headphones and the receiver
1.
indicator
R1
starts blinking blue.
Press the button
2.
R1
to accept the call.
Press the button
3.
R1
to end the call.
R1
R1
R1
2
1
3
Please note:
Only make a single short push to accept or end a call. It may take a couple of seconds before a call is
•
completely connected or disconnected.
The ringing tone of the mobile telephone call may be the same sound as heard from the mobile telephone
•
itself depending on the mobile telephone used.
If HearIt Mobile is turned off when a mobile telephone call comes in, that specifi c call cannot be answered or
•
ended using HearIt Mobile.
Making a mobile telephone call
Turn on HearIt Mobile by pressing the button
1.
R1
for up to fi ve seconds.
Enter the dial number on the mobile telephone and pick up the handset.
2.
The call is automatically transferred to HearIt Mobile.
3.
To end the call press the button
4.
R1
or end the call on the mobile telephone.
Rejecting an incoming call
When a call comes in a ringing tone will be heard in the hearing aid or headphones and the receiver
1.
indicator
R1
starts blinking blue.
Press receiver button
2.
R2-
(volume down) for 2 seconds to reject the call.
R1
R2-
2
1
Indicators
Below you can see an overview of the light indicators on HearIt Mobile
Flashing blue (R1):
Incoming call
Blue (R1):
Wireless Bluetooth call activated
Flashing blue (R3):
No Bluetooth connection
Green (R3-R7):
Volume level
Flashing red (R5):
Battery low
Charging
If the HearIt Mobile light indicator
R5
fl ashes red during operation, or if the unit cannot be turned on, HearIt Mobile
requires recharging.
Connect the power supply wire to HearIt Mobile’s jack
1.
R11
.
Connect the power supply to a power source and turn on.
2.
The light indicator
3.
R5
lights continuously red during recharging.
When HearIt Mobile is fully recharged, light indicator
4.
R5
lights continuously green.
Please note:
We recommend full charging
•
batteries before use, however,
partly charging the units does
not infl ict damage to them.
R11
1
2
+
3
4
Charged
*
* Plugs vary from country to country.
UK/US