Phonetics Sensaphone 4100, Руководство пользователя

Страница: 29 / 68

3. Using the number keys, enter the correct time
The 4100 will recite the digits as they are pressed.
4. If the time is AM, press the AM key
The 4100 will beep.
4.1 Then press ENTER. The 4100 will say “Enter.”
5. If the time is PM, just press ENTER/PM.
To interrogate the time:
1. Press the WHAT IS key
2. Press the TIME key
The 4100 will recite the time.
PRE-PROGRAMMED COMMUNICATIONS FEATURES
The following communications features are pre-programmed at the factory. The values
cannot be reprogrammed by the user.
CALL DELAY TIME
—The call delay time is the length of time that the Model 4100 will wait
after an alarm is recognized before it starts the dialout sequence. The Model 4100 will wait
30 seconds after an alarm condition exists before it makes a phone call. This time is only for
the first call.
INTERCALL DELAY TIME
—If the alarm is not acknowledged on the first call, the intercall
delay time is the amount of time that the Model 4100 waits before dialing the next Phone
number. The Model 4100 waits 1 minute before dialing the next Phone number in the
sequence if the alarm is not acknowledged.
VOICE REPETITIONS
—The voice repetitions is how many times the Model 4100 will
repeat the alarm message per phone call when it dials out. The Model 4100 will recite the
alarm message 4 times per phone call.
(enter number) [ ]
27
Chapter 3: Communications Programming