If do you need to open your speaker, please take Rhea’s bottom cover apart by unscrewing the two
screws shown in picture below. Then, lift the cover tilting it by about 20 ° and slide it back until the
flange on the front is released.
SPECIFICATIONS
•Box material: ...........................MDF
•Front material:.........................Acoustic Cloth 2.0
•Inside material: ......................Acoustic Foams
.........................................................AG150 and Basotect
•Power:...........................................10W
•Impedance: ..............................8 ohms
•Frequency response: ..........75 18000 Hz
•Sensitivity: .................................87 dB
•Driver protection: ..................IP64
•Dimensions (WHD):...............186x110x275 mm
.........................................................(7,32x4,33x10,82 in)
•Weight:.........................................2,25 Kg (4,96 lb)
SAFETY
•Carefully read the section of your transceiver
manual describing the speaker wiring.
•Do not use the stand to hold or carry the
speaker.
•Clean the speaker using a dry cloth. If required,
you can slightly dampen the cloth.
•Do not use solventbased cleaners.
•This speaker is a handmade product, slight
imperfections might be present.
Phonema Speakers
www.phonemaspeakers.com
Содержание Rhea Black
Страница 1: ......
