INSTALLATION
Rhea does not have the feet installed. Inside the box
you will find two bags containing rubber feet and fixing
screws. Read carefully the bag labels so that you can
choose the feet that corresponds to your transceiver.
To connect Rhea to your transceiver, first you need to
prepare the cable. You are welcome to use the supplied
cable and connector. On the one side, weld the
connector respecting polarity. On the other side, skin
10 mm (0,39 in) from each conductor and tin it. You
are ready not to interconnect the speaker and the
transceiver together using the input you prefer, A or B.
If you have purchased a second Rhea for the Gemini configuration, this can be connected by putting
together the terminals with those of the transceiver in either input A or B. Remember that in this
case the resulting impedance is 16 ohms.
We strongly recommend the Gemini configuration or the use of two speakers, each one oriented
towards each ear. This practice improves hearing since sound gets at the same intensity to your
ears. Moreover, it allows concentration by reducing fatigue. Should you just have one speaker,
please place it centred respect your position and at your ears level. You can use the extendable
stand to orient the speaker to your ears and align it with your transceiver. Remember not to exceed
the maximum height of 50 mm (1,96 in)
Connections diagram
Содержание Rhea Black
Страница 1: ......
