Phonak MSF0001 MicroField, Руководство пользователя

Страница: 30 / 68

24
Using MicroField for Rebroadcasting - Setting the Transmit Channel
If you are currently using a 72 MHz transmitter to broadcast signals to your FM receiver, you can
set up MicroField to work with your existing transmitter.
Your external 72 MHz transmitter broadcasts on a specific frequency,
which is then picked up by your FM receiver. In order for your trans-
mitter to send the signal from MicroField to the FM receiver, you will
need to connect it to your MicroField using an auxiliary cable from
Phonak. You also must program MicroField so that it will work with
your transmitter.
Setting up MicroField For Use With an External 72MHz Transmitter and Receiver
Find your product in the channel selection tables starting on
page A-2, and determine the MicroField channel number
that corresponds with your product. For example, Listen
channel 17 is MicroField channel 7P.
Turn on your 72 MHz transmitter and make sure it is set to
the correct channel.
(continued on next page)