7
Fitting Guide
MLxi and MLxi Baha
V1.00/20
10-03/visu’l © Phonak AG/All rights reserved/page 7/1
1
6. Other features
6.1 Synchronization
MLxi/MLxi Baha is a multi-channel receiver and can be synchronized to
any desired channel via the synchronization feature of the transmitter
(Direct Frequency Synchronization) or via the WallPilot (Automatic
Frequency Synchronization).
Direct Frequency Synchronization
All Phonak transmitters have a direct sync button. Refer to the user
manual of the specific transmitter. Please press the corresponding
button to synchronize the MLxi/MLxi Baha to the new channel. Hold
the transmitter less than 50 cm from the receiver.
Automatic Frequency Synchronization
The WallPilot (pictured below) automatically synchronizes the
MLxi/MLxi Baha to the channel used by a transmitter in a particular
room without the need for direct synchronization.
6.2 Monitoring
MLxi/MLxi Baha is able to communicate with the
inspiro
Dynamic FM
transmitter. When running
inspiro’s
monitoring function, data from
the receiver – such as battery status and the current channel – can be
obtained. The link’s operating range is usually 20 cm. Please hold the
inspiro
in front of the customer’s face, as shown in the picture below,
to obtain information about both FM receivers.
6.3 ChannelFinder
MLxi/MLxi Baha is able to find an interference-free channel. To access
this feature, the
inspiro
Dynamic FM transmitter is required. Please
read the
inspiro
user guide to use this feature.
6.4 Scanning
MLxi/MLxi Baha can search for the frequency used by a different FM
transmitter in the same room. MLxi/MLxi Baha will then switch to this
channel and the user can listen to the signal transmitted from this
other FM transmitter. This feature can be accessed by
inspiro
Dynamic
FM transmitter, SmartLink or Sm.
FM_FittingGuide_MLxi-MLxi_E_def.indd 7
15.4.2010 13:38:07 Uhr
