4
Fitting Guide
MLxi and MLxi Baha
V1.00/20
10-03/visu’l © Phonak AG/All rights reserved/page 4/1
1
Batt. T
ype 13 down
Output
MicroLink CI
+
4. Fitting MLxi
4.1 AutoConnect
MLxi/MLxi Baha features AutoConnect. This feature measures the input
impedance of the hearing instrument and automatically provides an
FM Advantage of 10 dB, regardless of whether the hearing instrument
is DPAI Yes or DPAI No. The fitter simply connects the MLxi/MLxi Baha
to the audio shoe attached to the hearing instrument.
Please note these important points:
Make sure your hearing instrument is switched on when you connect
ß
the MLxi/MLxi Baha.
The first time you connect MLxi/MLxi Baha to a hearing instrument,
ß
it may take up to one minute until MLxi/MLxi Baha has automatically
corrected the gain to provide 10 dB FM Advantage.
At every startup, AutoConnect plays a beep to measure the impedance
ß
of the hearing instrument. This measuring beep may be audible.
4.2 Advanced fitting of MLxi using FM SuccessWare
The extended mode of FM SuccessWare enables you to fine-tune some
parameters of the MLxi according to the needs of your customers.
MLxi can also be connected
to the iCom
A separate brochure describes the optimal
FM solution for different use cases,
including extensive information about
the combination of MLxi and iCom.
Other hearing instruments
Attach audio shoe according to the user
guide of the hearing instrument.
Baha
MLxi Baha can be plugged directly into
most Baha processors.
Make sure the circular MLxi Baha pin
matches the marked hole of the Baha
processor.
Cochlear implants (CIs)
Most CIs require an adaptor or the
MicroLink CI S interface.
Please refer to the brochure
“FM Solutions for Cochlear Implants”
which can be found on
www.phonakpro.com.
3
0
P
FM_FittingGuide_MLxi-MLxi_E_def.indd 4
15.4.2010 13:37:51 Uhr
