14
15
D Connectors
D Connectors
D1 To connect FreeCom 7100
u
The Phonak FreeCom 7100 headset can be combined with a variety of Phonak FreeCom
adapters for connecting to different aircraft audio panels (Fig 17).
u
To connect the FreeCom 7100 to the aircraft audio panel, use the suitable adapter:
U
Twin plugs PJ055/PJ068
U
XLR-5
U
U174/U
FreeCom
PJ055/PJ068
e-Box
XLR-5
e-Box
U174/U
e-Box
The QD-connector is used to connect the Phonak FreeCom headset to the FreeCom Adapter.
It can be easily connected and disconnected, allowing a pilot to leave his/her seat without
needing to remove the headset or disconnect the FreeCom adapter from the aircraft's main
panel (e.g. for getting out of the plane while keeping a hearing protection).
u
To open: pull apart the connector housing (never pull on the cables!)
u
To close: the white markings on both connector housings must be aligned and then pushed
together (Fig 18).
u
Do not turn on the cable screw jonts.
u
Do not fold the cable (Fig 19).
u
Never pull any connector by the cable! This may damage the cable and the connector and
cause communication problems.
Fig 18
Fig 17
Fig 19
