10
11
1
2
3
4
5
6
7
8
9
12
13
14
15
1. Joining the wing halves.
2. Installing the aileron servo and linkage.
Draw a center line.
Remove the covering.
Glue the wing joiner to the wing, using
the epoxy glue.
Apply the epoxy into the wing section.
Glue the wing by epoxy.
Apply the trim tape to the center section
on the top and the bottom of the wing
where they join.
Servo box.
Glue the two hard wood by C.A glue.
Mark the shape of the servo box to the
wing.
Remove the covering.
Glue the servo box by C.A glue.
Install and secure the aileron servo.
Install the two nylon control horn.
Install the clevis to the aileron pushrod.
Attach the clevis to the control horn.
Center line
Hard wood
Servo box
Nylon control horn
Metal pushrod
Clevis
Clevis
Control horn
tiger
3
Instruction Manual
