background image

5

USEPHOENIX.COM

1.800.533.7533

Specifications subject to change without notice.

5.4 GFCI Protection and the On-Board Duplex 

Outlet

The standard AC voltage outlet GFCI (Ground Fault Circuit 

Interrupter) promotes operator safety in wet applications. 

GFCI devices trip when a fault to electrical ground is sensed. 
It is recommended to check the GFCI protection prior to 

operation. To check, push the “TEST” button located on the 

GFCI duplex outlet will pop out. If operating properly the 

“RESET” button on the GFCI outlet will pop out. Depending 

on your Centrifugal Air Movers specific equipment, a tripped 

GFCI may be indicated by a small LED. The device can only 

be “RESET” when the Centrifugal Air Mover is connected to a 

wall outlet providing standard voltage. This duplex AC outlet 

allows the inter-connection of other AC powered devices. The 

sum total amperage of all devices (excluding the first fan) 

plugged into the receptacle must not exceed 8.5 amps.

6 How to Stack

Place your first fan on the floor, motor side down.  Pick up 

your second fan and orient it above the first fan.  Engage 

the alignment nubs on the side of both snouts.  Rotate the 

second fan down into position until the grills engage.  If the 

fans will be transported while stacked, they must be securely 

strapped into position.

Low Speed:

Quiet Operation

7 Maintenance

WARNING: Disconnect the unit from power before servicing 

or cleaning. Replace the safety grill after  

servicing, lubrication or cleaning. 

7.1 Servicing

Before each use, inspect for damage, blocked inlet or outlet, 

or any excess buildup of foreign material.
Inspect the GFCI to ensure it is not in a “tripped” condition. 

Push “RESET” to reset the GFCI.
When the Phoenix Centrifugal Air Mover Pro is first turned 

on, check for excessive vibration. If the unit vibrates 

excessively or if blower wheel rubs on housing, turn off the 

unit immediately. Have a service technician inspect the unit 

to locate the problem.

7.2 Cleaning

The housing is made of a durable and washable 

polyethylene. When cleaning, the use of solvents is NOT 

recommended. 

8 Replacement Parts and 

Optional Accessories

4030989               motor, 60HZ
4027572               blower wheel
4029721               rocker switch
4025458               red pilot light
4029742               cord
4030982               inlet grill, motor side
4030983               inlet grill, wheel side
4030984               grill, snout
4025203               breaker
4025205               GFCI

Contact the factory at 1-800-533-7533 to order 

replacement parts, or optional accessories

PNs 4030990 and 

4030980 are pictured 

to demonstrate 

maximum stackability.

Содержание Stackable CAM Pro








Отзывы: