Phoenix Spider MT503 SMART, Руководство пользователя

Страница: 7 / 12

VOLUME LEVEL INDICATOR
The LED bar, which is located below the buttons, represents the volume level currently being
adjusted.
CONNECTING AN EXTERNAL MIC AND SPEAKER
MICROPHONE ONLY
Connect the external microphone to the 3.5mm connector using a 3-pin to 4-pin adapter (the
same adapter that is used to connect a standard microphone to a Smart device). Select
“External Microphone” in the “Audio Jack Setting” of the Audio Setup Utility. The unit’s internal
speaker and microphones will continue working, along with the external microphone.
SPEAKERS ONLY (OR HEADPHONES)
Connect the external speakers to the 3.5mm connector. The unit’s built-in speaker will be
muted. Make sure that the “Headset” option is selected in the “Audio Jack Setting” of the Audio
Setup Utility (this should be the default).
MICROPHONE AND SPEAKERS (OR HEADPHONES WITH MIC)
Connect your headset into the 3.5mm connector, making sure that the “Headset” option is
selected in the “Audio Jack Setting” of the Audio Setup Utility (this should be the default.)
If you would like to use external speakers and a microphone, wire them the same way a
standard Smart Phone mic’d headphone would be wired.
NOTE: Standard wiring: tip left, ring1 right, ring2 ground, sleeve mic-in
Page 7