USING THE QUATTRO3
The Quattro3’s control panel has
5 buttons:
•
Power / Mute
button (in the middle) – see details of operation below
•
Volume Up
and
Volume Down
•
L1
- Increase microphone
sensitivity
•
L2
- Decrease microphone
sensitivity
NOTE:
Over sensitive microphone settings will cause distortion.
LIGHT INDICATIONS:
• Power / Mute button light off – unit is off
• Solid Power / Mute light – unit is on
• Blinking Power / Mute light – unit is on and the microphones are muted
BASIC UNIT OPERATIONS:
• Turn unit ON: push the Power / Mute button. The light will turn on
• Turn unit OFF: push the Power / Mute button and hold for 3 seconds. The unit will beep
4 times and turn off. The light will turn off
• Mute microphones: push the Power / Mute button once (for less than three seconds)
The light will start blinking
• Unmute microphones: push the Power / Mute button once (for less than three seconds)
The light will stop blinking and will stay on
NOTE:
The unit can be turned off from both the “ON” and “MUTE” positions. In both cases,
turning off requires pushing and holding the button for about 3 seconds.
control panel
