Phoenix Audio Technologies
- 7 -
www.phnxaudio.com
Power On / Power Off / Mute operation:
-
To turn on: push the Power/Mute button. The light will turn on.
-
To turn off: push the Power/Mute button
and hold for a few seconds
. The units will beep four times
and turn off in the fifth. The light will turn off.
-
To mute: push the Power / Mute button (for less than 3 seconds). The light will start blinking.
-
To un-mute: push the Power / Mute button (for less than 3 seconds). The light will stop blinking and
become steady.
Notes:
(1) The unit can be turned off from both On position or Mute. In both cases turning off requires
pushing and holding the button for about 4 seconds.
(2) After turning the unit off – you should wait a couple of seconds before turning it On again.
Otherwise the unit may fail to turn On.
Secondary Interface Panel
If your Quattro2 is equipped with an additional interface module it may have a secondary panel – depending
on your specific interface. Details and description are provided within the instructions of your specific interface
module.
