Phoenix Audio Technologies
- 9 -
www.phnxaudio.com
6. PSTN Interface - Connection and Operation
Phoenix offers two types of PSTN interfaces: 1L (for single line
interface) and 2L (for two-line interface). The PSTN interface
panel has two RJ jacks – one narrower than the other. A unique
telephone cable is supplied with the unit. This cable has a narrow
RJ connector on one end, and a wider one on the other.
The Quattro2 is connected directly to the PSTN line (through a standard telephone cable and into the RJ jack
in the wall); it will ring when a call is coming, “take” a call and “hang up” a call directly. For the dialing purposes
you can either utilize a standard telephone, purchase a Dial Pad from Phoenix, or download a software dialing
utility from our website.
Note: both the Dial Pad and dialing software utility will only work with the 1L model.
1) If a telephone is currently connected to your telephone line – unplug the cable from the telephone
(leave the “wall side” connected) and plug the loose end to the Quattro2 (the wider jack on the right).
If a telephone is not connected to the telephone line, use a standard telephone cable, plug one end to
the Quattro2 (wider jack on the right) and the other end to your telephone’s line wall jack.
2) If you wish to use a telephone in parallel with the Quattro2, and also utilize it for the dialing purposes,
plug the narrow connector of the unique cable to the Quattro2 (left side) and the other side to your
telephone. Note: the unit is supplied with a 6’ cable. A 20’ cable is also available and can be purchase
separately. You can now use your telephone as before to dial out and receive calls in.