MPA - Professional Power Amplifier
SAFETY TIPS
EQUIPMENT SETUP
Avoid setting up the equipment areas:
- subject to direct sunlight
- exposed to high temperatures
- exposed to moisture
- subject to high vibrations
- on an uneven surface
Non compliance can lead to damaging the outside frame and/ or other parts-
which could shorten the allotted time of operation.
VENTILATION
Install the equipment in the area with proper ventilation - with a distance of at
least 10cm from the rear of the device to the wall. Remember that objects such
as curtains should not cover the ventilation openings.
PLACING OBJECTS ON TOP OF THE AMPLIFIER
Do not place heavy object on top of the amplifier or on the electrical cord.
Such actions could cause the top plate to be permanently deformed or the electrical
cord to be severed.
VOLTAGE
The equipment cannot be plugged into a DC socket. Make sure the parameters
of the socket are known.
ELECTRICAL CORD
When inserting the electrical cord into the socket, hold the plug firmly and make
sure it is propely placed into the socket. Never attempt to touch the socket with
moist hands.
Avoid cutting, scratching, over bending, stretching, and folding the electrical cord.
Such actions could cause a fire or electrical shock.
When unplugging the cord do not pull the wire because an electrical shock could
result.
FOREIGN OBJECTS
- Do not allow objects such as needles, coins, screws, etc to accidentally fall into
the equipment through the ventilation openings. The result could be serious
damage to the amplifier and electrical shock.
- At no time should water or any other liquid to be spilled on or into the equipment
due to the high risk of fire or shock.
- Avoid using any aerosol sprays around the equipment.
SERVICE
Never try to take apart, fix or repair the equipment. If problems arise at time of operation
(interrupted sound, signals do not light up, traces of smoke arise, etc.) Immediately turn off the
amplifier and contact an authorized dealer. If the equipment will not be used for an extented period
of time , unplugged the amplifier from the outlet.
MAINTENANCE
Clean the frame, the main frame, and the regulator witch a soft moist towel, lightly covered
with a gentle detergent. Do not use any abrasive materials or detergents. Do not use any solvent
such as alcohol or gasoline.