MP-MX-3
- 2 -
™
The MP-MX-3 is a universally applicable mono preamplifier with 2 MIC and 1 LINE inputs (mixable), built-in
MP-3 player with BT receiver (supports all popular Bluetooth-enabled devices) and IR remote control.
Universal application, easy operation and high overload resistance characterize the MP-MX-3.
The preamplifier is equipped with high-quality built-in XLR jacks (Neutrik), switchable phantom power for
condenser microphones and separate LF / HF sound control for each of the three inputs and master section.
Separate sound control ensures precise room equalization and perfect adaptation to room acoustics.
In addition, the MP-MX-3 has switchable phantom power 18 V, LOW / HIGH ON-OFF jumper per mic. Input.
The output of the preamplifier MP-MX-3 is transformer balanced with select jumper for 0 dB or +6 dB signal
setting, providing high noise immunity at +6 dB setting of the output, so that the signal feedback can be done
by JY(ST)Y with 2x2x0.6 line.
On the front there is a USB interface for connection to USB-DRIVE, a slot for the SD memory card, display,
PREV-NEXT, START-STOP, PAUSE and REPEAT buttons.
With the IR remote control, all functions can be controlled remotely, and you can also switch between
SD-CARD, BT receiver and USB-DRIVE. USB-DRIVE and SD-CARD are automatically recognized by the
device. Volume and equalization are controlled with VOL-LINE and LOW/HIGH-EQ on the front of the MP-
MX-3. A mixed operation of RCA inputs (LINE) and USB/SD ports is possible.
The device is suitable for surface and flush-mounted installation (with matching optional surface-mounted
or flush-mounted housing).
The MP-MX-3 is ideal e.g. for gymnastics groups who want to play their MP3 files (on USB stick, SD card or
direct connection via Bluetooth-enabled devices) in the gym. Further optimal applications, e.g. in churches,
restaurants, multimedia rooms, schools etc.
These devices comply with the Electromagnetic Compatibility Directive 89/336/EEC and the Low Voltage
Directive 73/23/EEC.
Before putting the preamplifier MP-MX-3 into operation, we ask you to carefully read the safety instructions.
We ask you to perform the installation according to the following guidelines:
1 - Choose a dry environment.
2 - Avoid the proximity of heat sources.
3 - Only connect the device to 24 V DC power supply.
SaFeTY InSTRUcTIOnS
© copyright 2018, Phoenix Professional audio Gmbh, www.phoenix-pa.com
Phoenix logo is registered with the DE Patent and Trademark Office (TM)
All trademarks are the property of their respective owners
Instruction manual
GeneRal InFORMaTIOn