© Copyright 2022, Phoenix Professional Audio GmbH, www.phoenix-pa.com
Phoenix logo is registered with the German Patent and Trademark Office (TM).
All trademarks are the property of their respective owners.
HYMN-1-APP
Instruction manual
™
- 3 -
1. HYMN BOARD / LED PANEL
2. RADIO TRANSMITTER (GATEWAY)
Connect the WLAN transmitter (connection to the hymn board) to the power supply.
PLEASE MAKE SURE THAT THE TABLET IS ALWAYS IN THE RECEPTION RANGE
OF THE WLAN TRANSMITTER (see Appendix A)
3. TABLET
• Mount the Vesa mount in a convenient location where the
hymn board can be seen from all seats.
• Fasten the hymn board with the 4 threaded screws provided.
• Plug the barrel connector of the supplied power pack (12~24V
DC, 5.5/2.1mm) into the socket provided on the back of the
hymn board.
• Now connect the power pack to a power source (socket or
optional battery power pack)
• Please only use the supplied plugs and cables for this purpose.
• When using the tablet for the first time, please follow the manufacturer‘s original operating instruc-
tions.
• Now use the tablet to dial into the WLAN „Liedanzeige“ (hymn board) (you can find the procedure for
this in the original operating instructions for the tablet supplied)
• If you do not receive a connection confirmation, please check whether the hymn board and the radio
transmitter are correctly connected to a power source or whether you have used the cables provided
(radio - black). If this is the case, reduce the distance between the radio transmitter and the tablet
(max. 10-15 meters, depending on the structural conditions, shielding, etc.)
INSTALLATION