3
www.UsePhoenix.com • [email protected]
Toll-Free 1-800-533-7533 or 1-608-237-8400
2 Intended Application
The Phoenix 50Hz Axial Air Mover has changed the
drying industry by minimizing overall drying time on water
restoration jobs. The Phoenix 50Hz Axial Air Mover uses
patent pending FOCUS Technology to maximize air velocity
across floors and along walls for longer distances. By
maximizing the air velocity, water evaporates more quickly
from the carpet, cushion, sub-floor, wall, and sill plate.
3 Safety Certifications
The Phoenix 50Hz Axial Air Mover (P/N 4030940) conforms
to UL STD 507. Certified to CAN/CSA STD C22.2 No. 113.
4 Specifications
Part No.
4030940
Motor
1/4 hp 2-speed
4-pole, PSC Electric Motor.
Cords
4028264 IEC C13 to BS 1363 U.K. Plug
4028265 IEC C13 to AS 3112 Australian Plug
4028268 IEC C13 to CEE 7/7 European Plug
Air Flow
Approximately
4900 m3/hr (2900 cfm)
Cord
7 m Power Cord (20 ft)
Current
High - 1.4 Amps
Low - 1.25 Amps
Voltage
230 volts/50hz
Warranty
Year One - 100% parts and labor
(all components)
Year Two - 100% parts only (all components)
Years Three through Seven - Only materials
and workmanship of the housing are covered.
Dimensions
Cabinet
Width
51 cm (19.9”)
Height
50 cm (19.5”)
Depth
39 cm (15.2”)
Weight
13.4 kg (29.5 Lbs)
5 Power Requirements
5.1 International Cord/Plug Set
Connect the appropriate Cord/Plug set (provided) to the IEC
C13 connector. The Phoenix 50Hz Axial Air Mover draws 1.28
Amps; 230 volts and should be plugged into an appropriate
grounded (earthed) outlet.
5.2 Integrated Cord Wrap
The Phoenix 50Hz Axial Air Mover features integrated cord
management. Wrap the cord around the cord wrap as shown
and tuck under the previous wrap.
6 Applications
6.1 Sizing for Water Restoration Jobs
Current industry standards call for one air mover per 3-5
meters (10-16 linear feet) of wall space, dependent upon the
Class of water damage. For commercial structures, the indus-
try standard calls for one air mover for every 4.6 - 5.6 square
meters (50-60 square feet).
The water restoration industry based these estimates on the
air mover technology available when writing the standards.
Following these equipment-sizing standards when using the
Phoenix 50Hz Axial Air Mover will result in dramatically faster
drying times. If the restoration professional desires to merely
achieve industry standard drying times, he can use fewer
Phoenix 50Hz Axial Air Movers than standard equipment
standards allow.
6.2 Placement
Current industry guidelines suggest placing air movers at a
15° - 45° angle to wall. These guidelines apply to air mov-
ers without FOCUS Technology. FOCUS Technology allows the
restoration professional to place the Phoenix 50Hz Axial Air
Mover at an angle nearly parallel to the wall.
The test graph shown below depicts immediate air flow at the
FOCUS Technology corner. The 50Hz Axial Air Mover sustains
this air flow for more than 6 meters (20 feet) and maximizes
the air velocity across the floor and along the wall when
placed the at 4.5° angle from the wall.
By touching the front edge of the output side of the 50Hz
Axial air mover against the wall and rotating the rest of
Figure 3: Cord wrap
