Phoenix Model BERGFALKE, Инструкция по эксплуатации

Страница: 1 / 32

EP
version
�
.....
,.�
READ
THROUGH
THIS
MANUAL
BEFORE STA
RTING coNS
TRUCTION,
IT coNTAIN
S 11111PoffTAN
T INSTRUCT
IONS
AND WARNIN
GS coNCER
NING THE
ASSEMBLY A
ND usE OF
THIS 11110DEL-
PHOENIX MODEL
®
SPECIFICATION
- Wingspan: 3300mm (130 in)
- Length: 1590mm (62,6 in)
- Flying weight: 3400gr - 3600gr
- Wing area: 71 dm2
- Wing loading: 55g/dm2
- Wing type: HQ airfoils
- Covering type: Genuine ORACOVER®
- Radio: 4 channel - 4 mini hi-torque servo :
2 aileron; 1 elevator; 1 rudder (not included)
- Recommended receiver battery:
4,8- 6.0V 1000/1 S00mAh NiMH (not included)
- Flap: 2 electric flaps 440mm (not included)
- Spinner size: Aluminum H hub propeller holder,
shaft 6mm (not included)
- Motor: brushless outrunner 1200W,
800 KV (not included)
- Gravity CG: 16mm (0.62 in) Back from
the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 9mm up/down,
10% expo; High: 12mm up/down, 10% expo
- Control throw Elevators: Low: 9mm up/down,
12% expo; High: 12mm up/down, 12% expo
- Control throw Rudder: Low: 30mm right/left,
15% expo; High: 45mm right/left, 15% expo
- Experience level: Intermediate
- Plane type: Glider
RECOMMENDED MOTOR AND BATTERY SET UP
- Motor: RIMFIRE .32 (not included)
- Lipo cell: 4cells (not included)
- Esc: 40-60A (not included)
� UNDER SAFETY PRECAUTIONS
This radio control model is not a toy!
e
II is highly recommended that first-time builders seek advice of
experienced modelers before beginning assembly.
• Assemble this kit only in places out of children's reach!
• Take enough safety precautions prior to operating this model.
You are responsible for this model's assembly and safe operation!
• Always keep this instruction manual ready at hand for quick
reference, even after completing the assembly.