Phoenix Mecano RK Rose+Krieger Easywork, Руководство по эксплуатации

Страница: 82 / 112

3.3.3 LED lamp
The LED lamp (Fig. 7/1) is used as illumination for the assembly
workstation.
The lighting level can be dimmed continuously variably using a
button with Touch DIM function.
Further information:
n
Ä
Technical instructions for Easywork, chapter “LED lamp”
3.3.4 Runner profile with carriage
1 Runner profile
2 Carriage
The runner profile (Fig. 8/1) is fitted to the portal, and is used to
guide tools and aids (e.g. balancer).
Further information:
n
Ä
Technical instructions for Easywork, chapter “Runner
profile”
3.3.5 Balancer
The balancer (Fig. 9/1) is used as a tool holder which can be used
to position tools "weightlessly" in the assembly workstation using a
carriage (Fig. 9/3) in the runner profile (Fig. 9/2).
The entire weight of the tool (including any supply
lines) must be within the load bearing range of the bal-
ancer.
Further information:
n
Ä
Technical instructions for Easywork, chapter “Balancer”
Fig. 7: LED lamp
Fig. 8: Runner profile with carriage
Fig. 9: Balancer
Set-up and function
Optional modules > Balancer
29.05.2019 Assembly workstation RK Easywork 82