1-800-325-6952
Congratulations:
You have purchased a product of superior performance and design, which will give the best service when
properly installed, operated and maintained. These coolers can be used as convenient, roll-around spot coolers.
• Safety
• Installation
• Start-up
• Operation
• Maintenance
• Troubleshooting
• Read all instructions carefully before installation.
• This cooler must be connected to 120 Volt AC, 60 Hz (cycle)
power only. NOTE: Improper voltage will void the pump and/
or motor warranties and may cause serious personal injury
or property damage.
• This cooler must be plugged into a GFCI protected
receptacle, which has been properly installed in accordance
with all local and national codes. If you are not sure that
the receptacle is GFCI protected, consult with a qualified
electrician.
• This cooler is equipped with a power cord having an
equipment grounding conductor and grounding plug. Do
not attempt to defeat this safety device by removing the
grounding pin.
• Do
NOT
step on or roll over power cord with heavy or sharp
objects. Do not operate if the plug or cord is damaged in any
way. If the unit is damaged or malfunctions, do not continue
to operate it.
• Remove the plug from the electrical receptacle by pulling on
the plug and not the cord.
• Always disconnect electrical power to unit before attempting
to work on or service your cooler.
• Do
NOT
operate near open containers of flammable liquids or
gases.
01-999-2624 Rev A 11/20
• Do
NOT
operate this blower (fan motor) with any solid-state
speed control device.
• Do
NOT
operate this unit with pad frame(s) and/or air outlet
grille removed, this may cause the fan motor to overload and
damage the motor.
• Never wash your cooler cabinet with garden hose, water
may harm motor and pump.
NOTE:
• Do
NOT
use indoors on carpet or wood floor. Unit may leak
water and could damage flooring or create a slip hazard.
• Do
NOT
locate or operate cooler near exhaust or vent pipes
as odors or fumes may be drawn into unit.
• Your warranty does
NOT
cover shipping damage. Report all
shipping damage at once to store making the delivery.
• For future reference, record the model and serial number,
date and place of purchase of your evaporative cooler here:
READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
Model #
Serial #
Date of Purchase:
Place of Purchase:
WARNING
-
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
Owner’s Guide
Use and Care Manual
Model: MB10
Customer Service
This guide will provide you with information needed to assemble the unit for roll-around spot-cooling. It also contains information
on how to safely operate, inspect, maintain and troubleshoot your evaporative air cooler.
The first section, Assembly, contains instructions to prepare your cooler for roll-around portable service. The second section,
Maintenance, contains operational and maintenance instructions to aid in keeping your unit in good working order, while
Troubleshooting includes information to help diagnose and repair commonly encountered problems.
THE USE OF ANODE DEVICES, CHEMICAL ADDITIVES, OR
COOLER CLEANER TREATMENTS IN THIS COOLER WILL
VOID THE WARRANTY.
