Amplifier Owner’s Manual
www.phoenixgold.com
SPECIFICATIONS
Ti2 1000.4 SPECIFICATIONS
Frequency Response:
± 1dB from 20Hz to 20kHz
Signal to Noise Ratio:
>100dB
Crossover Slopes:
12dB per Octave
Front High/Low Pass Crossover Range: 45Hz to 4kHz
Rear High Pass Crossover Range:
20Hz to 4kHz
Rear Low Pass Crossover Range:
40Hz to 4kHz
Low Level Input Range:
200 millivolts to 8 volts
Lowest Recommend Load:
4 ohms Bridged/2 ohms Stereo
Typical Efficiency:
80%
Damping Factor
Greater than 200
RMS Power Output
150w x 4 @ 4 ohms Stereo
250w x 4 @ 2 ohms Stereo
500w x 2 @ 4 ohms Bridged
Power/Ground Wire Size:
4 Gauge
Recommend Power Wire Fuse:
80a
Dimensions:
11.7” L x 7.1” W x 2.0” H
296mm L x 180mm W x 52mm H
SUBWOOFER CHANNEL:
Frequency Response:
± 1dB from 20Hz to 300Hz
Signal to Noise Ratio:
>100dB
Crossover Slopes:
12dB per Octave
Low Pass Crossover Range:
20Hz to 300Hz
Subsonic Crossover Range:
10Hz to 50Hz
Variable Phase:
0 to 180 degrees
Low Level Input Range:
200 millivolts to 8 volts
Lowest Recommend Load:
2 ohms
Typical Efficiency:
80%
Damping Factor:
Greater than 200
Ti2 1600.5 SPECIFICATIONS
FRONT AND REAR CHANNELS:
Frequency Response:
± 1dB from 20Hz to 20kHz
Signal to Noise Ratio:
>100dB
Crossover Slopes:
12dB per Octave
Front High Pass Crossover Range: 20Hz to 4kHz
Rear High Pass Crossover Range:
20Hz to 4kHz
Rear Low Pass Crossover Range:
40Hz to 4kHz
Low Level Input Range:
200 millivolts to 8 volts
Lowest Recommend Load:
4 ohms Bridged/2 ohms Stereo
Typical Efficiency:
80%
Damping Factor
Greater than 200
RMS Power Output
500w x 1 @ 4 ohms
800w x 1 @ 2 ohms
Recommend Power Wire Fuse:
100a
Power/Ground Wire Size:
4 Gauge
Dimensions:
14.4” L x 7.1” W x 2.0” H
366mm L x 180mm W x 52mm H
RMS Power Output
125w x 4 @ 4 ohms Stereo
200w x 4 @ 2 ohms Stereo
400w x 2 @ 4 ohms Bridged
POWER OUTPUT NOTE: A power birth certificate is included for each amplifier. Ti2
amplifiers are conservatively rated and will exceed their RMS power rating shown
here. All RMS power ratings and measurements are at 14.4 volts with no more than
1% THD. Ti2 1000.4 and Ti2 1600.5 feature ADAPT technology which provides the
same power output from 11 to 15 volts with music material.
