Phoenix Contact THERMOFOX, Руководство пользователя

Страница: 32 / 46

THERMOFOX
32
PHOENIX CONTACT 106986_en_01
4.1.7 Creating cable flags
For large-area marking of cables, cable flags can be used. To do so, enter the
marking for the front side. The back side is printed automatically with the same
marking.
Figure 4-7 Example of a cable flag
• Press the turquoise key.
• Select “6. Cable Flag” . Press the key.
• Select the required settings (see below).
• Press the key to select an entry. Go back with or key.
• You can select measurements with the arrow keys. Some measurements can
also be entered directly by using the number keys.
The following settings can be made:
Enter the diameter or the cross section of the cable. The printer then determines
the optimum length. Alternatively, you can specify a fixed length for the flag.
If you select this template, the entered marking will be deleted. First create the
template and than enter the marking.
-W1.3 -W1.3 -W1.3
Tem-
plate
Del./Back
Clear
Menu
Selection Possible entry Example
Orient. Text alignment [Hor., Ver.]
Wrap Length Diameter or cross
section of the cable
[Diameter, Cross
section]
Flag Length Length of the cable
flag
[Auto Length, User
Set]
Center Line Center line [Off, Dotted, Thin,
Medium, Thick]
-W1-3 -W1-3
Length