Phoenix Contact PSR-CT Series, Руководство по эксплуатации, Страница: 27 / 69

Mounting
108366_en_01 PHOENIX CONTACT
27 / 69
The values of the switching distances apply under the following conditions:
– Center offset of m = 0 with regard to arrow alignment
– Measured on plastic mounting surface
– Without influence from surroundings and mounting surface
Table 3-1 Minimum distances and switching distances
Actuation position Travel
direction
Minimum dis-
tance in X direc-
tion
Switching distances with regard to respective
travel direction
X direction - Typical switch-on distance 13 mm, typical
Assured operation distance S
ao
Position A:
10 mm
Position B:
9 mm
Switching hysteresis 1 mm, minimum
2 mm, typical
Assured release distance S
ar
20 mm, maximum
Repeat accuracy ≤ 10 %
Y direction 7 mm
Minimum distance
between the sensor and
actuator in the X direc-
tion
Typical switch-on distance ±9 mm, typical
Assured operation distance S
ao
At 7 mm distance between the sensor and
actuator in the X direction
Position A:
±6 mm
Position B:
±5 mm
Switching hysteresis 1 mm, minimum
2 mm, typical
Assured release distance S
ar
±11 mm, maxi-
mum
Repeat accuracy ≤ 10 %
Z direction - Typical switch-on distance ±12 mm, typical
Assured operation distance S
ao
At 6 mm distance between the sensor and
actuator in the X direction
Position A:
±7 mm
Position B:
±15 mm
Switching hysteresis 1 mm, minimum
2 mm, typical
Assured release distance S
ar
+Z direction:
23 mm, maximum
-Z direction:
32 mm, maximum
Repeat accuracy ≤ 10 %
A
B
+Z
-Z
X
Y