Phoenix Contact PLOTMARK, Руководство пользователя

Страница: 8 / 28

PLOTMARK
8 / 28
PHOENIX CONTACT 107753_en_00
2.3 Control panel
Table 2-1 Description of the control panel
Type Printing Meaning
LED Green Engraving mode Engraving mode activated (only with the optional en-
graving unit)
Yellow Penstation open Pen magazine open
Red Plotter out of order ERROR
Green ON/OFF Plotter ready for operation
Yellow Clear buffer Data available in the storage memory. You can delete
the data by pressing the “Clear Buffer” button.
Red STOP Plotter in stop mode
Button ON/OFF Switching on and off
Pen UP/ Pen DOWN
UP/DOWN
LEFT/RIGHT
These button functions are not used for normal oper-
ation. They are only used for settings and for ser-
vices.
Penstation open /
close
Pen magazines open or close, to use marker pens.
After approx. two minutes after opening or switching
off, the pen magazine closes automatically.
Clear buffer Delete the print data from the storage memory. The
device must be in stop mode.
STOP Stop the current print job
If you press the “STOP” button during a current print
job, this is interrupted.
The marker pens are stored in the pen magazine. The
writing arm travels to the top right corner of the de-
vice. The red LED indicates the interruption.
If you press the “STOP” button again, the plotter cali-
brates itself and the print job continues. The red LED
goes out.