Phoenix Contact PLOTMARK, Руководство пользователя

Страница: 13 / 28

For your safety
107753_en_00 PHOENIX CONTACT
13 / 28
3.3 Setting up the marker pens in CLIP PROJECT
Figure 3-3 File, Print setup, Plotter, PLOTMARK, Pen assignment
• Via the “Manage pens” button, you can adjust new pens and parameters such as the
plot speed.
• Indicate where the marker pens are located in the pen magazine (Penstation).
• Switch to the “Pen settings” tab. Indicate which font size is executed with which pen.
• If you use the marker pen directly in the pen holder on the writing arm, remove the check
box for “Use pen magazine”.
3.4 Inserting the magazines
Eight catch pins are located on the plotter's writing surface. Up to four different magazines
can be located on these catch pins. Depending on the size of the marking elements, differ-
ent magazines are available. The magazines can occupy one, two or four segments on the
writing surface.
When starting a print job, CLIP PROJECT indicates the position of the magazine on the writ-
ing surface. Always place the first magazine to the left of the writing surface