1
Description
Configurable 3-way isolating amplifier
MINI MCR-SL-UI-UI
© PHOENIX CONTACT
Data sheet
The 6.2 mm wide MINI MCR-SL-UI-UI... is a configurable 3-
way isolating amplifier. It is used to electrically isolate, condi-
tion, amplify, and filter standard signals.
The standard analog signals 0...20
mA, 4...20
mA, 0...10
V,
2...10
V, 0...5
V or 1...5
V are available electrically isolated on
the input and output sides.
The DIP switches, which can be accessed on the side of the
housing, are used to configure the input and output signal
ranges.
The power supply (19.2 ... 30 V DC) can be supplied either via
connection terminal blocks "3"/"4" or "7"/"8" on the modules
or in conjunction with the DIN rail connector. Please refer to
the section titled "Power supply" for more information.
Features
–
Configurable 3-way isolating amplifier
–
Input and output signal range configurable via DIP
switches
–
Approval for Ex-zone 2 (nA)
–
Screw or spring-cage connection can be provided
–
Can be supplied configured or unconfigured
NOTE: Correct usage in potentially explosive areas
The module is a category 3 item of electrical equipment. It is absolutely vital to follow the instructions provided
here during installation and observe the information in the "Safety regulations and installation notes".
Make sure you always use the latest documentation.
It can be downloaded from the product at
www.phoenixcontact.net/catalog
.
This data sheet is valid for all products listed on the following page:
101945_en_05
2012-09-27
