Phoenix Contact FL BT EPA, Руководство пользователя, Страница: 30 / 52

FL BT EPA
30
PHOENIX CONTACT 7900_en_01
2.4 Parameter list for the configuration
Table 2-2 Parameter list for Info page
Designation Description
Update Status Update display.
Auto Update Update display automatically. The additional data load
may affect the actual communication.
Settings Change to configuration page.
Order No. Order number of the device
Firmware Version Installed firmware version. You may find a more recent
version in the download area of this article at
phoenixcontact.com .
System overview
System identification
Device Name Device name (information only), e.g., used for SNMP.
Description Device description (information only), e.g., used for SNMP.
Physical Location Device location (information only), e.g., used for SNMP.
Contact Responsible contact (information only), e.g., used for
SNMP.
General Data General data (information only), e.g., used for SNMP.
LAN Status
IP Address Layer 3 network address (IP) of the EPA,

default: 192.168.0.254
Subnet Mask Filter mask for IP addresses, default: 255.255.0.0
Default Gateway IP address of the transition point to other network seg-
ments. Not required for communication within the own
address area.
IP Assignment Type of address assignment
– Static + DHCP Relay (default): static IP address,
assignment via the entry field on the “Settings” page.

Its standard value is: 192.168.0.254. Devices
connected via the LAN side can place DHCP requests
in the network.
– DHCP: IP address of the EPA is retrieved from an
active DHCP server in the network. In the case that
address assignment fails, the EPA uses the address
set in the WBM.
– Static & DHCP Server: the EPA itself uses the address
permanently set, and operates as the DHCP server for
other devices on the LAN side (start address:
192.168.0.1).
LAN MAC Address Layer 2 device address (MAC) of the LAN connection (per-
manently assigned)