Phoenix Contact 2888699, Руководство пользователя

Страница: 56 / 72

PSI-DATA/BASIC-MODEM/RS232
6-8
PHOENIX CONTACT 102906_01_en
&V Display Configuration Profiles
The &V command can be used to view the active and stored configuration profiles and the
four telephone numbers that are stored on your modem. Any commands or registers that
appear in the active or stored profiles, but are not described in this user manual, can be
ignored.
&W Save Active Configuration
This command saves the active configuration in the permanent memory.
&Y Select Active Profile
The &Y command specifies which saved profile is loaded when the modem is switched on
or reset.
&Zn=x Store a Telephone Number in the Permanent Memory
The &Zn=x command stores a telephone number (x) (31 digits, maximum) in the
permanent memory of the modem. Your modem can store up to four telephone numbers
(n = 0 through 3).
%S Callback Security
*P=x Store a Password in the Permanent Memory
The *P=x command stores the password x (maximum of seven characters from the ASCII
character set, excluding question marks) in the permanent memory on the modem. No
password is stored on the modem by default. If no password is stored and the
%S1 or %S2
command is activated, the modem skips the password request stage.
*P? Display Stored Password
The *P? command displays the stored password.
This command cannot be activated when the modem is online.
&W0 Save the active settings as configuration profile 0.
&W1 Save the active settings as configuration profile 1.
&Y0 Use configuration profile 0 (default).
&Y1 Use configuration profile 1.
%S0 Disable callback security.
%S1 Enable callback security with password validation.
%S2 Enable password validation.