manualshive.com logo in svg

Phoenix Contact 2888699, Руководство пользователя

Поделиться
Скачать
Phoenix Contact 2888699 Скачать руководство пользователя страница 5

PSI-DATA/BASIC-MODEM/RS232

102906_01_en

PHOENIX CONTACT

General Terms and Conditions of Use for Technical Documentation

Phoenix Contact GmbH & Co. KG reserves the right to alter, correct, and/or improve the 
technical documentation and the products described in the technical documentation at its 
own discretion and without giving any notice.

The provision of technical documentation (in particular data sheets, installation 
instructions, manuals, etc.) does not constitute any further duty on the part of 
Phoenix Contact GmbH & Co. KG to furnish information on alterations to products and/or 
technical documentation. Any other agreement shall only apply if expressly confirmed in 
writing by Phoenix Contact GmbH & Co. KG. Please note that the supplied documentation 
is product-specific documentation only.

Although Phoenix Contact GmbH & Co. KG makes every effort to ensure that the 
information content is accurate, up-to-date, and state-of-the-art, technical inaccuracies 
and/or printing errors in the information cannot be ruled out. 
Phoenix Contact GmbH &  Co. KG does not offer any guarantees as to the reliability, 
accuracy or completeness of the information provided. Phoenix Contact GmbH & Co. KG 
accepts no liability or responsibility for errors or omissions in the content of the technical 
documentation (in particular data sheets, installation instructions, manuals, etc.).

As far as is permissible by applicable jurisdiction, no guarantee or claim for liability for 
defects whatsoever shall be granted in conjunction with the information available in the 
technical documentation, whether expressly mentioned or implied. This information does 
not include any guarantees on quality, does not describe any fair marketable quality and 
does not make any claims as to quality guarantees or guarantees on the suitability for a 
special purpose. 
Phoenix Contact GmbH & Co. KG reserves the right to alter, correct, and/or improve the 
information and the products described in the information at its own discretion and without 
giving any notice.

Содержание 2888699









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды