
48
EN
EN
EN
EN
1.8
Alarm memory
When disarming, if siren chirps 5 times (first one is longer), it means that during your absence
alarm has been activated. After opening the door, LED will inform you by number of flashes
reason of alerts (see table below). LED will stop flashing after ignition will be turned ON.
Reason of alarm
Number of LED flashes
Shock sensor
5 times
Door
6 times
Ignition
7 times
Additional sensor
8 times
Trunk
9 times
1.9
Panic
This function will activate alarm anytime needed.
Activation : Press the buttons
simultaneously for 3 seconds.
Note: When systemis disarmed, door is locked and immobilizeris turned on too.
Deactivation: Press any button.
1.10
Car finder
Can be used to find your car on the parking place.
Loud: When system is armed, press the button
. Siren will chirp 5 times, and lights will flash
10 times.
Silent: When system is armed, press button
. Lights will flash 10 times.
1.11
Door open warning
When the ignition is turned ON and the system is disarmed, the lights will flash 10 times to alert
when door or trunk is opened. This function is optional (option 14).
1.12
Remote trunk release
To activate remote trunk release press the buttons
simultaneously. The duration of the
output trunk is optional (option 9). You can choose also whether using of remote trunk release
cause disarming the system at the same time or not (option 12).
1.13
Remote AUX activation
To activate additional output AUX press the buttons
simultaneously.
Duration of AUX impulse can be set (option 10).
1.14
PAGER output
When alarm is triggered, pager output is activated at the same time. This output can be used for
long distance pager, GSM pager or any other device.
2
System Installation
2.1
Learning code of transmitter
It is possible to program up to 4 transmitters into the system. Follow the procedure below to
program a new transmitter to the system. Please note that during programming mode all present
remotes will be deleted from memory.