18
d)
Within 8 seconds, press any button on first transmitter.
e)
Siren will chirp once, lights flash once to confirm that first transmitter has been programmed to the system.
f)
The siren will chirp the number equal to number of learned transmitter.
g)
After programming of last transmitter Turn OFF the ignition.
All remote controllers you wish to use, must be programmed at the same time.
If there was no remote programmed, old remotes will stay in system memory.
In case that remote controller is lost and you want to avoid its’ abusing by someone who will find it, erase all
programmed remotes from alarm memory.
To do it, follow this procedure:
a)
When the system is disarmed, turn the ignition ON.
b)
Within 8 seconds, press the valet switch 5 times.
c)
Within 8 seconds turn the ignition OFF.
d)
All transmitters will be erased from the memory and system will enter valet mode.
For programming new transmitter, must exit valet mode at first.
1.2
Emergency disarming
If the transmitter becomes lost or non-functional, the system can still be disarmed by following procedure:
a)
System is armed or alarm is triggered (siren sounds).
b)
Enter the car and turn the ignition ON.
c)
Within 8 seconds, press the valet switch 5 times (default code).
d)
After 5 seconds, siren will chirp 4 times to confirm that system is disarmed.
e)
Turn the ignition OFF.
To exit from the emergency mode, press any button of transmitter.
1.3
Changing the code for emergency disarming
Default code for emergency disarming is 5. We recommend you to change this code after the installation of car alarm.
Follow the steps below to change default code:
a)
When the system is disarmed, turn the ignition ON.
b)
Within 8 seconds, press the valet switch 9 times.
c)
Siren will chirp 4 times.
d)
Press valet switch according to your new code (1-9). Each pressing the button is confirmed by LED flash.
e)
After 8 seconds siren will chirp several times. Number of chirps is corresponding to the number of new code.
f)
Turn the ignition OFF.
1.4
Valet mode
The only feature operating in valet mode is the keyless entry function. Valet mode is useful when leaving your car in
service. To enter valet mode follow this procedure:
a)
When the system is disarmed, turn the ignition ON.
b)
Within 8 seconds, press the valet switch 3 times.
c)
Siren will chirp once and the LED will be constantly on.
d)
Turn the ignition OFF.
To exit valet mode, repeat the same procedure.
During the valet mode car is not protected and immobilized by alarm !
2
SETTING THE OPTIONAL FUNCTIONS
To enter the programming mode, follow this procedure:
a)
When the system is disarmed, turn the ignition ON.
b)
Within 8 seconds, press the valet switch 7 times.
c)
After 8 seconds system will enter the programming mode and siren will chirp 3 times.
d)
Turn off the ignition, LED is constantly on.
e)
Within 8 seconds, press valet switch to select the desired option (from 1 to 22). Siren will chirp once and LED
flash once to confirm each pressing the switch.
f)
Within 8 seconds from last pressing turn the ignition ON. Siren chirps once.
g)
Now press valet switch to change the feature setting. Siren will chirp and LED will flash 1,2,3 or 4 times to
indicate current setting.
h)
Setting will be saved after turning the ignition OFF or after 8 seconds without pressing the button.
i)
Repeat the above steps from “
d)
” to program another feature.
j)
To exit programming mode turn the ignition OFF-ON-OFF, or leave ignition turned OFF for 8 seconds without
pressing the button.
Содержание Mistral Max 2
Страница 24: ...24...
